| Home » Products » Tray Dryer » Tray Dryer - Standard Model |
| Tray Dryer - Standard Model HIPL – 026 A : |
 |
- Triple walled in construction.
- Exterior made of Mild Steel [ 18 swg. ] constructed on thick iron angle framework. The entire outer body is duly painted by long lasting DUCO Paint.
- Pre-heating Chamber made of Mild Steel [ 20 swg. ] & Inner Chamber made of Stainless Steel [18 swg.]
- Gap between the walls filled with initial layer of Asbestos Sheets followed by a dense layer of high quality low thermal mass glass wool insulation.
- Provision for forced air circulation using motorized blower.
- Provided with control panel for monitoring temperature.
- Installed with a Microprocessor based PID Digital Temperature Indicating Controller with BUILTIN Timer
- DIGITAL HIGH TEMPERATURE SAFETY CUT-OFF INCORPORATED WITHIN THE UNIT.
- Superior quality contactor for cutting / restoring power to the heaters are incorporated.
- Doors provided with safety cut-out system disables the Motor & the Heaters when doors are opened in operational mode.
- Control panel with suitable neon lamps for indication of Mains On/Off. Heater On/Off etc.
- 24/48/ 96 & 192 TRAYS TRAY DRIER SUPPLIED WITH HEAVY DUTY (16 swg.) S.S. LM-304 PIPE TROLLEY’s BUT WITHOUT TRAYS.
- Unit works on EITHER 230 V AC, 50 Hz. OR 440 V AC 3 Phase Supply.
|
| TEMPERATURE RANGE : UP TO 150°c |
|
|
|
| |
| No. Of Trays |
External Size
W X D X H |
Chamber Size
W X D X H |
Heater
Load |
No. Of
Door |
No. Of
Blower |
No. Of
Motor (HP) |
No. Of
Trolley |
| 12 |
56” x 26” x 54” |
33” x 18” x 36” |
5 KW |
1 |
1 |
1 x 0.5 |
- |
| 24 |
76” x 48” x 54” |
33” x 36” x 36” |
12 KW |
1 |
2 |
2 x 0.5 |
01 |
| 48 |
80” x 48” x 86” |
40” x 36” x 72” |
18 KW |
1 |
2 |
2 x 1.0 |
01 |
| 96 |
140” x 48” x 86” |
80” x 36” x 72” |
30 KW |
2 |
2 |
2 x 1.0 |
02 |
| 192 |
140” x 82 ” x 86” |
80” x 72” x 72” |
56 KW |
2 |
4 |
2 x 2.0 |
04 |
|
| |
Extras : |
- Aluminium Tray 18 SWG of size 32” x 16” x 1.25” for above Tray Driers [Each]
- Stainless Steel [ LM-304 grade ] Tray 18 SWG of size 32” x 16” x 1.25” for above Tray Driers [Each]
- Stainless Steel [ LM-316 grade ] Tray 18 SWG of size 32” x 16” x 1.25” for above Tray Driers [Each]
|
| |
|
| |
