| Home » Products » High Temperature Oven » High Temperature Oven - GMP Model |
| High Temperature Oven - GMP Model : |
- TRIPLE walled in construction.
- The Inner Chamber is wound by a layer of thick Mineral wool. Gap between the walls filled with initial layer of Asbestos sheet and dense second layer of high insulation low thermal mass Glass wool.
- DIGITAL HIGH TEMPERATURE SAFETY CUT-OFF
INCORPORATED WITHIN THE UNIT.
- ISI Marked Air Heating Elements are provided on the side walls of the chamber.
- Superior quality contactor for cutting / restoring power to the heaters are incorporated.
- Doors provided with safety cut-out system disables the Motor & the Heaters when doors are opened in operational mode.
- Provided with heavy duty S.S. LM-304 ball cages for locking arrangement
- Provision for forced air circulation using motorized blower.
- Unit works on either 230 V AC, 50 Hz. 1 Phase Supply OR 440 V AC, 50 Hz. 3 Phase Supply.
|
| TEMPERATURE RANGE : Ambient + 5°c to + 350°c |
| TEMPERATURE ACCURACY : ± 1 °c |
| TEMPERATURE UNIFORMITY : ± 2 °c |
|
| |
|
 |
|
| Standard Model - HIPL- 025 : |
- Exterior made of S.S. LM-304 grade [ 20 swg. ] constructed on thick S.S. LM-304 angle framework.
- Pre-heating chamber & Outer chamber made of Stainless Steel LM – 304 grade [ 20 swg.] and inner chamber made of Stainless Steel [ 18 swg.] Mirror finish..
- Microprocessor based AUTO TUNING PID Digital Temperature Indicating Controller with built in Timer upto 999 hrs. to set the sterilization time cycle.
- DIGITAL High Temperature Safety cut off provided.
- Rod type Shelves provided are made of Stainless Steel
- Provided with Validation Documents.
|
| |
Chamber Size
W x D x H |
Rating Watts
|
Shelves |
| In inches |
In Cms |
| 18” x 18” x 18” |
45 x 45 x 45 |
5000 W |
02 |
| 18” x 18” x 24” |
45 x 45 x 60 |
6000 W |
03 |
| 24” x 24” x 24” |
60 x 60 x 60 |
7500 W |
03 |
| 24” x 24” x 36 ” |
60 x 60 x 90 |
9000 W |
04 |
|
| |
| Optional : |
- Microprocessor based AUTO TUNING PID Digital Temperature Indicating Controller for precise Temperature control with BUILTIN Digital Timer in lieu of standard Controller (FOR STANDARD MODELS ONLY)
- Microprocessor based PROGRAMMABLE PID Controller cum Indicator with Printer Interface to connect Dot Matrix Printer. Print interval programme can print Date, Time & Temperature with print interval settable between 1 to 99 minutes [ without Printer ]
- Same as above but with PC Interface with software
|
| |
|
| |
