| Home » Products » Cooling Incubator » Cooling Incubator - GMP Model |
-
| Cooling Incubator - GMP Model : |
- Double walled in construction, gap between the two walls filled with high quality Polyeurethene Foam (PUF)
- Full length inner acrylic door with and outside metal door with solid S.S. plated lock & key.
- Food Grade Silicon Gasket fitted on the Chamber and Magnetic Gasket fitted on outer metal door ensures zero leakage between the door & the Chamber.
- Provided with forced air circulation for uniform temperature within the chamber.
- Hermetically sealed Emerson Make Compressor unit utilizing R-134A an eco-friendly refrigerant with electronic time relay to safeguard the Compressor.
- Castor wheels for easy moveability.
- Additional high temperature safety system to cut-off all heaters ensuring temperature within chamber doesn’t exceed +70°C also incorporated in the Unit.
- Electrically operated on 230 V Ac, 50 Hz. Supply.
|
| TEMPERATURE RANGE |
: + 2°c to + 8°c |
| TEMPERATURE ACCURACY |
: ± 0.5°c |
| TEMPERATURE UNIFORMITY |
: ± 1 °c |
|
| |
| GMP Model - HIPL- 004 A : |
- Outer chamber made of Stainless Steel LM – 304 grade [ 20 swg.] and inner chamber made of Stainless Steel [ 20 swg.] Mirror finish.
- Microprocessor based AUTO-TUNING PID Digital Temperature Indicating Controller, Resolution 0.1°c with suitable sensor. In the event of power failure, Non-Volatile memory allows chamber to return to original set point when power is restored.
- DIGITAL High Temperature Safety cut off provided
- Rod type Shelves provided are made of Stainless Steel
- Provided with Validation Documents.
|
|
 |
|
| |
| Capacity |
Internal Dimension
W X D X H [cms] |
External Dimension
W X D X H [cms] |
Shelves |
| 4 Cu.Ft. [ 120Ltrs] |
45 x 45 x 60 |
68 X 100 X 151 |
02 |
| 6 Cu.Ft. [165 Ltrs] |
50 x 50 x 70 |
73 X 105 X 161 |
02 |
| 10 Cu.Ft. [ 280 Ltrs] |
55 x 55 x 90 |
78 X 110 X 176 |
03 |
| 12 Cu.Ft. [ 324 Ltrs] |
60 x 60 x 90 |
83 X 111 X 181 |
03 |
| 16 Cu.Ft. [ 440 Ltrs] |
60 x 60 x 125 |
83 X 111 X 214 |
04 |
| 29 Cu.Ft. [ 800 Ltrs] |
80 x 80 x 125 |
110 X 118 X 214 |
05 |
|
| |
| Optionals : |
- Microprocessor based PROGRAMMABLE PID Controller cum Indicator with Printer Interface to connect Dot Matrix Printer. Print interval programme can print Date, Time & Temperature with print interval settable between 1 to 99 minutes
[ without Printer ]
- Same as above but with PC software & connectivity
|
NOTE : Use of a Voltage Stabilizer is strongly recommended for all Cooling Incubator Chambers and is a pre-condition for free service during warranty period. |
| |
|
| |
