B.O.D. Incubator - GMP Model

Double walled in construction, gap between the two walls filled with high quality Polyeurethene Foam (PUF)
Full length inner acrylic door with and outside metal door with solid S.S. lock & key.
Food Grade Silicon Gasket fitted on the Chamber and Magnetic Gasket fitted on outer metal door ensures zero leakage between the door & the Chamber.
Provided with forced air circulation for uniform temperature within the chamber.
Hermetically sealed Emerson Make Compressor unit utilizing R-134A an eco-friendly refrigerant with electronic time relay to safeguard the Compressor.
Castor wheels for easy moveability. Provided with Validation Port.
Additional high temperature safety system to cut-off all heaters ensuring temperature within chamber doesn’t exceed +70°C also incorporated in the Unit.
Electrically operated on 230 V Ac, 50 Hz. Supply.

TEMPERATURE RANGE	: + 5°c to + 60°c
TEMPERATURE ACCURACY	: ± 0.5°c
TEMPERATURE UNIFORMITY	: ± 0.5°c

GMP Model - HIPL- 003 A :

Outer chamber made of Stainless Steel LM – 304 grade [20 swg.] and inner chamber made of Stainless Steel [ 20 swg.] Mirror finish.
Microprocessor based AUTO-TUNING PID Digital Temperature Indicating Controller, Resolution 0.1°c with suitable sensor. In the event of power failure, Non-Volatile memory allows chamber to return to original set point when power is restored.
DIGITAL High Temperature Safety cut off provided.
Rod type Shelves provided are made of Stainless Steel
Provided with Validation Documents.

Capacity	Internal Dimension W X D X H [cms]	External Dimension W X D X H [cms]	Shelves
3 Cu.Ft. [ 90Ltrs]	45 x 45 x 45	64 x 92 x 125	02
4 Cu.Ft. [ 120Ltrs]	45 x 45 x 60	64 x 92 x 140	02
6 Cu.Ft. [165 Ltrs]	50 x 50 x 70	69 x 97 x 150	02
10 Cu.Ft. [ 280 Ltrs]	55 x 55 x 90	74 x 102 x 170	03
12 Cu.Ft. [ 324 Ltrs]	60 x 60 x 90	79 x 107 x 170	03
16 Cu.Ft. [ 440 Ltrs]	60 x 60 x 125	79 x 107 x 205	04
29 Cu.Ft. [ 800 Ltrs]	80 x 80 x 125	99 x 127 x 205	05

Optionals :

DIGITAL High Temperature Safety cut off in lieu of Thermostatic High Temperature Safety cut off (For STANDARD Models Only)
Microprocessor based PROGRAMMABLE PID Controller cum Indicator with Printer Interface to connect Dot Matrix Printer. Print interval programme can print Date, Time & Temperature with print interval settable between 1 to 99 minutes [ without Printer ]
Same as above but with PC software & connectivity

NOTE : Use of a Voltage Stabilizer is strongly recommended for all B.O.D. Incubator Chambers and is a pre-condition for free service during warranty period.

Online Quote


Please fill the below form to get an online quotation.


Name

Tel.

Email

Country

Product Intrest in